✔ Analysis test tubes, refills for fiber penciltubes, ballpoint pen tubes, tablet tubes, lipstick tubes, etc.
✔ The "HSC-Kompakt" is modularly designed in order to be adjusted tothe workpiece in each case
✔ Output up to 50.000 parts/h, (depending on product and feeding system)
Which workpiece is suitable?
It has to be cylindrical
It must have a good inherent stability since printing takes place without workpiece carriers.
It can be sleeve-like or tubular
It can be of solid matter
It can show a draft angle of similar or smaller 1 degree
It can show a Ø of 2 - 30 mm. (Larger upon request)
It can have a length between 20 - 150 mm. (Larger upon request)
It can be of various materials (e.g. plastics, steel, aluminium etc.)
The parts to be printed are transported to the printing cylinder without a workpiece carrier. With the rotary movement of the tampon roller as well as its friction coefficient the workpiece is translated into a rolling movement. At the same time the workpiece is rotating around the tampon roller via guiding plates. The transport of the parts and the delivery of the ink takes place in a synchronous rotary movement.
With this patented rotary tampon printing process extremely high hourly outputs with highest printing quality are possible,
thanks to its conti-nuous operation.
Technical data:
Print image 1-colour, Cliché cylinder Ø 100 mm, Tampon roller Ø 200 mm, Printing ink adjusted to the workpiece Output Refills for ballpoint pens Ø 2 mm up to 50.000 parts/h
Refills for ballpoint pens Ø 6 mm up to 40.000 parts/h
Refills for fiber pencil tubes Ø 10 mm up to 30.000 parts/h
Tablet tubes Ø 22 mm up to 20.000 parts/h
